Want to know when the price changes?
Turning Toolholder SVJBR1218JX-11FFJCTM
Want to know when the price changes?
Turning Toolholder SVJBR1218JX-11FFJCTM — Kyocera external turning toolholder. Key specifications: Shank width (B): 18 mm; Shank height (H): 12 mm; Overall length (L): 120 mm; Insert Size: 11; Hand of Tool: Right; Internal coolant: Yes.
Kyocera turning toolholders are designed to clamp indexable carbide inserts on lathes and turning centers. They are used for external turning, facing and profiling operations.
The range covers inscribed circle diameters from 4.76 to 12.7 mm and insert thicknesses from 2.38 to 7.94 mm. Corner radii run from 0.1 to 0.8 mm. Shanks measure 10–32 mm in height and 10–25 mm in width, with overall lengths of 80–170 mm.
The holders suit general turning of components in machine building and metalworking. The insert is chosen to match the workpiece material and the required finish.
Select the shank section to fit the tool post of your machine, and the overall length to suit the required tool overhang. Make sure the inscribed circle diameter, insert thickness and corner radius match the insert to be used. A smaller corner radius suits finishing and fine contours, while a larger one gives a stronger edge for roughing.
There are no reviews for this product.
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.