Want to know when the price changes?
Turning Toolholder KGHSL2020K-4
Want to know when the price changes?
Turning Toolholder KGHSL2020K-4 — Kyocera toolholder for grooving inserts. Key specifications: Grooving width: 4-4.5 mm; Grooving depth: 13 mm; Shank width (B): 20 mm; Shank height (H): 20 mm; Overall length (L): 125 mm; Hand of Tool: Left.
Kyocera KGH+KGHS are external turning toolholders for grooving and cut-off operations. They accept grooving inserts and are used for cutting grooves and parting off workpieces on lathes.
The holders are available in shank sections from 20 × 20 mm up to 25 × 32 mm and in overall lengths of 125–170 mm. All versions have a tool cutting edge angle of 90°, and the maximum cutting depth ranges from 13 to 17 mm.
The holders are intended for external grooving and parting off in general turning, where a stable clamp of the insert is needed in the groove. The workpiece material is determined by the insert grade fitted to the holder.
Select the holder by the required groove or cut-off depth: the maximum cutting depth of 13–17 mm must exceed the depth of the groove. Choose the shank size and length to match the machine's tool post and the overhang needed. Keep the overhang as short as the part allows.
There are no reviews for this product.
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.