Want to know when the price changes?
Turning Toolholder SINL2420S-16
Want to know when the price changes?
Turning Toolholder SINL2420S-16 — Kyocera toolholder for threading inserts. Key specifications: Shank height (H): 18 mm; Shank / clamping diameter (D1): 20 mm; Overall length (L): 180 mm; Hand of Tool: Left; Internal coolant: No.
Internal thread turning toolholders carry threading inserts for cutting internal threads in pre-drilled or bored holes on lathes. They are used for finishing threads inside bores, sleeves and housings.
The range covers shank diameters (DCON) of 12–32 mm and shank heights (H) of 11–30 mm. Overall lengths (OAL) run from 100 to 250 mm, and the tool cutting edge angle (KAPR) is 90°.
The holders suit internal threading across typical turned materials, with the insert grade chosen to match the workpiece. The thread pitch (TP) for this range is 2 mm.
Choose the holder by minimum bore diameter (DMIN), which ranges from 6.4 to 37 mm, so that the tool fits the hole with clearance for chip evacuation. Select the longest shank diameter the bore allows to keep the tool rigid, and match the overall length (OAL) to the required thread depth.
There are no reviews for this product.
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.