Want to know when the price changes?
Turning Toolholder PRGCL2525M-10
Want to know when the price changes?
Turning Toolholder PRGCL2525M-10 — Kyocera external turning toolholder. Key specifications: Shank width (B): 25 mm; Shank height (H): 25 mm; Overall length (L): 150 mm; Insert Size: 10; Hand of Tool: Left; KAPR: 90 °; Internal coolant: No.
These external turning toolholders accept RC round inserts and are used for general external turning, including profiling and contouring operations on shafts and similar parts.
The range covers inserts with an inscribed circle diameter of 10–12 mm and thicknesses of 3.18–4.76 mm. Shank sections of 20–25 mm by 20–25 mm and overall lengths of 125–180 mm allow fitting to different machine setups.
The holders suit a wide range of external turning tasks where a round insert provides a strong cutting edge and a smooth contour. The tool cutting edge angle varies from 60 to 90 °, which supports different approach directions and workpiece geometries.
Select the shank size to match the toolpost of the machine, and the overall length to the required reach. Choose the insert diameter and thickness according to the depth of cut and the load, using the thicker 4.76 mm inserts for heavier cuts. Check that the cutting edge angle suits the part geometry before setup.
There are no reviews for this product.
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.